---
title: "How do I set altitude and lateral tolerance thresholds for flight log breach analysis?"
description: "Setting altitude and lateral tolerance thresholds for flight log breach analysis controls how Dronedesk flags deviations from planned operations. This guide shows how to define the acceptable margins so flight logs are checked against these limits automatically, highlighting breaches without manual"
url: https://help.dronedesk.io/en/articles/145-how-do-i-set-altitude-and-lateral-tolerance-thresholds-for-flight-log-breach-analysis
collection: "Configuration"
updated: 2026-11-09
language: en
---

# How do I set altitude and lateral tolerance thresholds for flight log breach analysis?

Setting altitude and lateral tolerance thresholds for flight log breach analysis controls how Dronedesk flags deviations from planned operations. This guide shows how to define the acceptable margins so flight logs are checked against these limits automatically, highlighting breaches without manual

Uploading a flight log file to Dronedesk provides an awful lot more information than just what you see here in front of you. If you click on the icon in the key column below the map, you'll see that it pulls up this window with further information. It includes an overview which we're looking at here. It includes data about the air risk, the weather at the time of the flight, the aircraft and battery performance, and also data quality.

On the right hand side we have the flight profile. Clicking on this graph at any point will highlight where the drone was at that particular point in the flight. On the map this will show you if your drone has exceeded the 120 meter limit. In the graph below you'll see that it shows the horizontal distance from the pilot. If you want, you can add tolerance to both of these limits and I'm going to show you how.

Click on the profile icon in the top right hand corner and select Settings. From the drop down menu, choose Workflow, Configuration and Ops parameters. Choose Flight Log Data. You'll see that there is a checkbox which enables you to auto update the battery charge cycle if the value is found in your log. And you can also auto update the drone or battery firmware version again if that data is found in your log.

But below this are the fields where you are able to add the height and lateral tolerance distance.
